xDecoder 14.0 — активация, поддержка и охват ЭБУ 14.0

Bin сказал(а):

xDecoder 14.0 disponible​

Une nouvelle version de xDecoder DTC Manager est désormais disponible.

La version 14.0 ajoute la prise en charge du Delphi DCM6.1 utilisé par Ford et inclut tous les nouveaux modules ECU introduits entre les versions 12.8 et 14.0 .

• Nouvelle prise en charge de Delphi DCM6.1 pour Ford
• Couverture étendue des marques Bosch, Continental, Delphi, Siemens et Visteon
• Ajout de la compatibilité avec BMW, Ford, Iveco, VAG, PSA, Renault, Nissan et Dacia
• package d'installation propre mis à jour

Important : Extrayez la version 14.0 dans un nouveau dossier propre et lancez-la toujours via START-xDecoder.exe . Ne mélangez pas ce package avec des fichiers de versions antérieures.

Les demandes d'activation et l'assistance technique sont traitées dans ce fil de discussion.

Consultez le journal des modifications complet et les instructions d'installation de xDecoder 14.0

Нажмите, чтобы раскрыть...

sirikikone сказал(а):

HWID : 48EC0D646C4A7029

Нажмите, чтобы раскрыть...

reedunlock сказал(а):

6E969023C0A2DA6A

thanks.

Нажмите, чтобы раскрыть...

Stivencho сказал(а):

Hello
0840A8ECE1B89B68
Thanks!

Нажмите, чтобы раскрыть...

Mario32 сказал(а):

CFADD51FF0573DD4

Нажмите, чтобы раскрыть...

gentianecu сказал(а):

HWID: 3723F63902493B76

Нажмите, чтобы раскрыть...

DaysGSM сказал(а):

Hello ,
Please :

HW 53D00C989219EC76

Thanks in advance,
DG

Нажмите, чтобы раскрыть...

Bin сказал(а):

xDecoder 14.0 — Official Discussion Thread​

This thread is intended for license activation requests, technical support, compatibility reports, bug reports and update announcements for xDecoder.

xDecoder DTC Manager — утилита карт Bosch и Delphi

03.10.2025

v12.7 Offline DTC tables, сопоставление масок и путей для быстрого отключения кодов ошибок

• Bin
• bosch DCM6.1 delphi Диагностическое ПО DTC OFF ПО: ЭБУ Ford xdecoder
• ⚙️ Инструменты и софт для тюнинга

The current release is xDecoder 14.0, featuring expanded support for Bosch, Continental, Delphi, Siemens and Visteon ECUs used by BMW, Ford, Iveco, VAG, PSA, Renault, Nissan and Dacia vehicles.

License Activation​

To request activation:

1. Download and fully extract the current xDecoder package.
2. Run START-xDecoder.exe.
3. Copy the displayed 16-character Hardware Identifier.
4. Reply to this thread and post your HWID.
5. Wait for your personal .reg license file to be issued.
6. Close xDecoder before installing the license.
7. Download the supplied .reg file and double-click it.
8. Confirm that the license information may be added to the Windows Registry.
9. Launch the program again using START-xDecoder.exe.

Each license is generated for one specific HWID. A registry file issued for another computer will not work.

The filename of your license will be based on your own hardware identifier and will therefore be different for every user.

If the Hardware Identifier window appears again after importing the registry file, post the newly displayed HWID together with a screenshot of the activation window.

Current ECU Coverage Added in Recent Releases​

• 14.0 — Delphi DCM6.1 for Ford
• 13.9 — Continental SID211 for Ford
• 13.8 — Bosch MD1CS069 for Iveco
• 13.7 — Bosch MD1CP014 for VAG
• 13.6 — Bosch MD1CS004 for VAG
• 13.5 — Visteon ESU412 for Ford
• 13.4 — Bosch MG1CS201 for BMW
• 13.3 — Bosch MG1CS024 for BMW
• 13.2 — Bosch MG1CS003 for BMW
• 13.1 — Continental EMS3155 for Renault, Nissan and Dacia
• 13.0 — Siemens SID803 for PSA
• 12.9 — Bosch EDC17CP65 for Ford
• 12.8 — Bosch EDC17C45 for Nissan and Renault light commercial vehicles

SID803 note: Modifications are applied to the MPC file, but both the MPC and external flash files are required for complete decoding.

MD1CS069 note: Additional original files are still useful for broader testing and compatibility verification.

Technical Support and Bug Reports​

When reporting a problem, include as much of the following information as possible:

• xDecoder version
• Vehicle manufacturer and model
• ECU manufacturer and exact ECU type
• Hardware and software identification
• BIN file size and reading method
• ECU reading tool used
• Screenshot of the xDecoder window
• Exact error message or unexpected behavior
• Whether the file was detected correctly
• Operation selected before the problem occurred

Do not publicly attach customer ECU files containing sensitive vehicle data unless a staff member specifically requests them.

Installation Notes​

• Install version 14.0 into a new clean folder
• Do not combine files from different xDecoder versions
• Do not run the application directly from an archive
• Keep all included EXE, DLL and BIN components together
• Always launch the program through START-xDecoder.exe
• Do not start Decoder.exe directly

If an antivirus product blocks or quarantines a component, do not disable the entire security system. Post the exact detection name and affected filename in this thread first.

File Safety​

Always preserve the untouched original ECU read. Work only with a separate copy and save every processed result under a new filename.

A removed DTC does not repair the electrical, mechanical or software-related cause of the fault. Verify the modified file and its checksums before programming it into a control unit.

Download and Full Description​

View the complete description and download xDecoder DTC Manager

Нажмите, чтобы раскрыть...

Nobody сказал(а):

BA681BD3D5D713EC

Нажмите, чтобы раскрыть...

Bin сказал(а):

xDecoder 14.0 — Official Discussion Thread​

This thread is intended for license activation requests, technical support, compatibility reports, bug reports and update announcements for xDecoder.

xDecoder DTC Manager — утилита карт Bosch и Delphi

03.10.2025

v12.7 Offline DTC tables, сопоставление масок и путей для быстрого отключения кодов ошибок

• Bin
• bosch DCM6.1 delphi Диагностическое ПО DTC OFF ПО: ЭБУ Ford xdecoder
• ⚙️ Инструменты и софт для тюнинга

The current release is xDecoder 14.0, featuring expanded support for Bosch, Continental, Delphi, Siemens and Visteon ECUs used by BMW, Ford, Iveco, VAG, PSA, Renault, Nissan and Dacia vehicles.

License Activation​

To request activation:

1. Download and fully extract the current xDecoder package.
2. Run START-xDecoder.exe.
3. Copy the displayed 16-character Hardware Identifier.
4. Reply to this thread and post your HWID.
5. Wait for your personal .reg license file to be issued.
6. Close xDecoder before installing the license.
7. Download the supplied .reg file and double-click it.
8. Confirm that the license information may be added to the Windows Registry.
9. Launch the program again using START-xDecoder.exe.

Each license is generated for one specific HWID. A registry file issued for another computer will not work.

The filename of your license will be based on your own hardware identifier and will therefore be different for every user.

If the Hardware Identifier window appears again after importing the registry file, post the newly displayed HWID together with a screenshot of the activation window.

Current ECU Coverage Added in Recent Releases​

• 14.0 — Delphi DCM6.1 for Ford
• 13.9 — Continental SID211 for Ford
• 13.8 — Bosch MD1CS069 for Iveco
• 13.7 — Bosch MD1CP014 for VAG
• 13.6 — Bosch MD1CS004 for VAG
• 13.5 — Visteon ESU412 for Ford
• 13.4 — Bosch MG1CS201 for BMW
• 13.3 — Bosch MG1CS024 for BMW
• 13.2 — Bosch MG1CS003 for BMW
• 13.1 — Continental EMS3155 for Renault, Nissan and Dacia
• 13.0 — Siemens SID803 for PSA
• 12.9 — Bosch EDC17CP65 for Ford
• 12.8 — Bosch EDC17C45 for Nissan and Renault light commercial vehicles

SID803 note: Modifications are applied to the MPC file, but both the MPC and external flash files are required for complete decoding.

MD1CS069 note: Additional original files are still useful for broader testing and compatibility verification.

Technical Support and Bug Reports​

When reporting a problem, include as much of the following information as possible:

• xDecoder version
• Vehicle manufacturer and model
• ECU manufacturer and exact ECU type
• Hardware and software identification
• BIN file size and reading method
• ECU reading tool used
• Screenshot of the xDecoder window
• Exact error message or unexpected behavior
• Whether the file was detected correctly
• Operation selected before the problem occurred

Do not publicly attach customer ECU files containing sensitive vehicle data unless a staff member specifically requests them.

Installation Notes​

• Install version 14.0 into a new clean folder
• Do not combine files from different xDecoder versions
• Do not run the application directly from an archive
• Keep all included EXE, DLL and BIN components together
• Always launch the program through START-xDecoder.exe
• Do not start Decoder.exe directly

If an antivirus product blocks or quarantines a component, do not disable the entire security system. Post the exact detection name and affected filename in this thread first.

File Safety​

Always preserve the untouched original ECU read. Work only with a separate copy and save every processed result under a new filename.

A removed DTC does not repair the electrical, mechanical or software-related cause of the fault. Verify the modified file and its checksums before programming it into a control unit.

Download and Full Description​

View the complete description and download xDecoder DTC Manager

Нажмите, чтобы раскрыть...

Remma сказал(а):

Good morning, is it possible to get the activation " 46FE453A322D1C24 " Thank you.

Нажмите, чтобы раскрыть...

madboost сказал(а):

1BF3C1AA9241C201

Нажмите, чтобы раскрыть...

Gemini сказал(а):

May routine steps stay quick and important decisions receive the attention they deserve.

Нажмите, чтобы раскрыть...

madboost сказал(а):

Out of date

Нажмите, чтобы раскрыть...

• The exact message/screenshot at launch, and the version shown in the title bar
• Whether 1BF3C1AA9241C201 was taken from the fresh 14.0 install or from your previous version